|
|
|
|
|
POST HOLES & TREE HOLE DIGGING - DRILLING |
|
It's not easy digging and drilling post holes in Bastrop. In fact, it can be terribly challenging, and also wearing on the post hole digging equipment. The reason for this is the vast system of tree roots, occasional deep rocks, and sometimes very dense soils. In fact, post hole drilling from one hole to the next, just a few feet away can be so different that it takes 2 minutes for one hole and 10 minutes for the next. But overall, the average for post hole digging and drilling in Bastrop in slower earth characteristics is about 4 to 8 holes per hour, and the average for faster earth characteristics is about 6 or 10 holes per hour. Depth of the hole plays a factor too. The deeper the hole, the longer it takes to drill. Tree hole digging near Bastrop is even more difficult in that it requires multiple hoes to be dug to plant a tree. Drilling post holes in rock and difficult ground is our specialty. when you can only dig down so far using a rock bar or other hand held digger, call us! We offer fast reliable and professional service. We have the most up to date technology to complete your post hole digging needs fast. From t-posts to trees, we have auger sizes to get the job done for you. When digging for post holes near Bastrop, the reason we do not use a jackhammer is that the jackhammer creates messy holes that are not well defined and thus it can be difficult to install the fence posts. Also the post holes and planter holes done with jackhammers end up taking a lot more concrete because of the size and shape of the opening. In the hill country near Bastrop, we generally encounter hard packed caliche, dirt mixed with caliche, rock and dirt, and caliche and dirt. Our post hole drilling and digging augers can handle any combination of these types of earth. Roots are not a problem for us because the augers we use are specially designed for drilling thru them. Our system for post hole drilling and planter hole digging in Bastrop is driven by the powerful twin opposing hydraulic cylinders of the Belltec. They also allow us to apply the entire weight of the tractor and rig directly to the auger in the form of down pressure. Our rig weighs about 11,000 lbs. So, a lot of weight is behind the auger and it literally breaks, crushes, grinds, and demolishes rock, roots, and other impediments. For drilling post holes in Bastrop and
digging tree holes in Bastrop, there is not a more effective rig than this
post hole drilling rig. Contact us today!
|
|
